Lessons of economics: how to seal the pool "Intex"

Inflatable and prefabricated pools of Intex company are very popular. They are quickly and easily installed, they can be repeatedly transferred from one place to another. Maintenance of the pool does not require much time, effort and special investment. The drawback of this product is that it is easily pierced. Nails, sharp stones, thin dry branches, claws of domestic animals are the first enemies of the inflatable pool. Therefore, before installing it on the site, carefully inspect the surface of the earth and clean it. But if the puncture still happened, do not rush to grieve. Your inflatable pond can be saved. How and what to seal the Intex pool? The answer to this question is presented in the following information.

What does the manufacturer offer?

Intex company for the repair of inflatable pools and mattresses produces special sets of materials. What is included in them? Adhesive for bonding PVC surfaces and vinyl patches. In use, the repair kit is very simple and convenient. But these latches will be used during the first puncture, but what should I do with repeated "accidents"? We study other methods of repair of an inflatable reservoir.

Method number 1 - fast

Than to stick a pool "Inteks" very urgently? This can be done with an ordinary tape. But first you need to know exactly where the hole is located. Soap foam helps to detect it. Prepare it from any detergent diluted in water. When
Use a brush or a sponge to apply foam to the surface of the pool. Bubbles will appear in the punctures. Circle these problem areas with a marker. Then lower the inflatable pond and leave to dry. Then cover the holes with pieces of scotch. It can be applied in two or three layers. Keep in mind, this method of repair is suitable for inflatable children's pools, which are made of thin PVC. Such patches will last for several days. And here is how to glue the frame pool "Intex" from a denser material? Next, let's talk about this.

Method number 2 - reliable

In search of an answer to the question about how to glue the Intex pool, we recall the old good glue Moment. It is he who will help us revive the pond of PVC. To begin with, we find punctures on its surface in the manner described above, and mark these places. How to seal an Intex pool? It's pretty simple. Of fine rubber, we cut out the patches of the right size and apply a layer of glue on them. "The moment" covers the problem zones themselves on the surface of the inflatable water body. We wait about five minutes, while the glutinous material reacts with PVC, and we put a lacquer. The next few minutes, press her fingers. Then we will crush this place with a solid object and leave it to dry for no less than 12 hours. Repair inflatable water can be and with the help of other types of glue, intended for fastening products made of polyvinyl chloride.

Leaky inflatable pond can be thrown away, you can give to "treatment" in the tire repair shop, well, you can do it yourself. About what to glue the Intex pool in the home, you have already learned, which means that you can easily perform the repair procedure.