"Kia Spectra" disassembly is an important operation when using a car

The car "Kia Spectra" was released in 2002. This is a kind of sports car, with a front-wheel drive, five doors. The body is a type of "sedan". The front part is slightly elongated, with 4 headlights. The salon is quite spacious and comfortable.

"Kia Spectra" - a safe and economical car, allows you to drive confidently and calmly.

The "Kia Spectra"

With the onset of a certain season, car owners have to change their wheels: from summer to winter, from winter to summer. Some want to change the wheels to alloy wheels. In both cases, it is very important to consider how the machine is broken up. It has its own size and can be different, depending on the model of the car. For example, the "Kia Spectra" spreading is indicated as 4 * 100, 35 ... 38, 56.0. What do these figures mean?

4 * 100 means that there are four holes on the disk circumference, where four bolts are fastened. The diameter of the circle itself is one hundred millimeters. The hub hole is fifty-six millimeters in diameter. And the length of the bolts is from 35 to 38 millimeters.

The importance of spreading

Such an important operation, like the Kia Spectra dispensing, guarantees the safety of driving on the road. Without the correct definition of unlocking, serious problems in driving can occur. Of course, this can immediately not be noticed. But over time, the condition of the suspension will deteriorate or the steering wheel will change.

Therefore, it is very important that the "Kia Spectra" dispensing is properly checked and correctly done.

Distance between bolts

This distance must be strictly defined.

When buying discs on them, data is written on the breakdown, according to which the desired disk is selected. The disk already has holes for the bolts. If there is no such record on the disk and there are no holes, then it means that you can make the disassembly yourself.

To do this, the store is brought an old copy and compare the size of the stripping. Or, using a special measuring device, a caliper, measure the distance of the fasteners on the wheel. Then the disk is unrolled.

With an odd number of fasteners, the spreading is determined by a special formula. First, the distance from the hole of one bolt to the other is measured. If the number of fixtures is three, then the result is multiplied by 1.155, if five - by 1.701.

The procedure of the stripping is important for any model of the car. And not only "Kia Spectra." Spreading the wheels is an important manipulation to ensure good driving and keeping the car in good condition.