How to sew the chevrons on the tunic correctly?

Chevron is called a graphic sign (image), reminiscent of the Latin letter V, turned by various sides. In this article we will find out how to sew the chevrons on the tunic without errors. It is known that in the army and other formations for a long time there are insignia. Previously, "emblems" for the soldiers were tattoos, with which they adorned their bodies. The first chevrons appeared in the Middle Ages: they denoted the status of the owner and his belonging to a particular service. Of course, servicemen did not always know how to attach stripes to the uniform.

Historical standards

So, we'll figure out how to sew the chevrons on the tunic properly. Based on history, the element usually belongs to the military. But he finds application also in overalls of the various enterprises, a uniform of employees of security structures and power departments. If you need to sew a chevron on a military uniform , then you need to act according to certain standards. These graphic signs are sharpened in a special way in specific places - this is, most often, the left sleeve of the tunic.

We answer the question how to sew the chevrons on the tunic. If the sleeve has a pocket, the image is attached at a distance of two fingers from its lower edge. Of course, it is very difficult to operate with a thread and a needle, but the result will exceed your expectations!

Technology

The technology of fitting a graphic sign to a sleeve is simple, but it requires some skill. First you need to measure the required interval from the top seam of the sleeve, then put the chevron on the place intended for it. Further, with a usual pin or a needle, the upper point of the sign should be attached to the fabric of the sleeve. This point should be placed in the middle, if its width is meant.

In fact, how to sew chevrons on a tunic, every military man should know from the first days of service. But we are studying the technology further ... Now we put on the tunic and become the corresponding side in front of the mirror. The lower edge of the chevron is placed on the freely lowered hand so that the sign is kept on the sleeve without a warp, strictly vertically. The second needle needs to attach the lower edge of the patch to the intended location.

Next, the tunic needs to be carefully removed and with small stitches hidden inside, sew the image along the contour. Chevron should not form wrinkles at the same time. Try to keep it snug against the sleeve. Of course, the color of the thread must match the color of the stripe fabric.

rules

Agree, how to sew chevrons on a tunic, few know. Here there are strict rules. Information can be found in Order No. 300 of June 22, 2015. On the front side of the left sleeve there must be a sign of belonging to the General Staff, the Ministry of Defense, the Rear Services of the Armed Forces, the families and types of the Armed Forces, and the Railway Troops.

And now we'll find out how to sew a chevron on a military tunic. On the right side of the right sleeve is usually placed a sign about belonging to the fleets or military districts, special services and troops, specific military units. It should be noted that no more than one image is attached to the sleeve!

In general, chevrons (armbands) will have to be sewn to those who wear:

• Woolen tunics;
• Flannel;
• Woolen jackets;
• Demi-season jackets (except for officers of the highest rank);
• Woolen jackets;
• Casual winter jackets;
• Jackets for everyday suits;
• Everyday demi-season jackets;
• Field jackets (except water and windproof suits).

Chest chevrons pritachivayut:

• To field jackets (except water and windproof suits);
• To the jackets of everyday costumes.

It is necessary to remember that the name strip is located on the left breast area, and the chevron "The Armed Forces of Russia" is on the right.

Form of police

And how correctly to sew the chevrons on the tunic to the police? Graphical signs attesting to belonging to the Ministry of Internal Affairs of Russia are sharpened to the left sleeve at a distance of 80 mm from the upper edge of the image to the shoulder. Other chevrons are attached to the right sleeve with the same interval.

The rules for sewing the chevrons of the Ministry of Internal Affairs are described in Order No. 575 of the Ministry of Internal Affairs of the Russian Federation of July 26, 2013. So, on the form of the police, the graphic signs are sewn in the following order:

• The airborne unit does not wear shoulder patches.
• On the camouflage, the shoulder patches are not sewn.
• If the policeman has a special rank, he places the patches on the left shelf of the suit and back.
• Employees of combat units of the State Traffic Safety Inspectorate. At "traffic police" the chevron is sewn on the left shelf of the suit, while for the light-reflecting materials, the "Police" and "DPS" - on the back.
• Employees of special purpose units ("OMON" and "SOBR") are sewing strips on jackets.

How to sew the chevrons on the jacket of the FSSP, representatives of the deans know that they were experts, creating instructions on this issue. In fact, such signs are attached to the tunic as well as the designations of the Ministry of Internal Affairs. By the way, listeners and cadets of specialized educational institutions wear rectangular patches corresponding to the course of study ("kursy"). They are placed on the left sleeve of the form: from the shoulder to the top point a distance of 20 cm should be observed.

Chestguards

The police wear the chest images:

• On vests, raincoats, jackets. Chevron is fastened with a pin to his left breast pocket.
• On sweaters, blouses, jumpers, shirts. The patch is connected to the left breast pocket valve by means of a pin or a flap for the button.
• On the tunic. The sign is attached with a pin on the chest to the left where the ribbons of orders should be placed, or 1 cm below them.
• On raincoats, woolen jackets, coats. The image is attached with a hairpin to the chest on the left 8 cm below the shoulder of the lapel.
• On a coat or a sheepskin coat. Chevron is fastened with a pin 4 cm below the sign "Police" on the left breast area.

FSIN

And now we will answer the question how to sew the chevrons on the FSIN tunic. In general, this is described in detail in Order of the Ministry of Justice of the Russian Federation of 08.11.2007 №211 "On the approval of the description of the form of employees of the executive criminal system and the rules for its wearing."

So, the chevron of the MIS workers is sharpened to the right side of the right sleeve, and the employees of the central structure of the Federal Penitentiary Service of Russia - to the front of the left. Further, the graphic sign of the workers of the territorial bodies of the penitentiary system is sharpened to the outer part of the left sleeve, and the sign of the employees of the institutions is located there. By the way, the strips, the placement of which was not mentioned above, FSIN workers should sew on the left sleeve. Chest images, as well as honor marks, employees of the Ministry of Justice of Russia and the Federal Penitentiary Service are worn on the right chest. They are placed after the mark of distinction received for the termination of professional educational institutions.

And yet, how correctly to sew the chevrons on the jacket FSIN? On it the chevrons are arranged so that the top layer is below the level of the corner of the lapel by 70 mm, and if there is a sign of class or medals (orders) - 10 mm below them. By the way, the interval from the upper edge of the FSIN patch to the shoulder seam should be 8 cm.

FSB

Few know how to sew a chevron on the FSB jacket. We will also find out this complicated question. Placement of signs on the form is described in Order No. 413 "On the military uniform of officers of the FSB bodies". The sign indicating the connection with the organs is sewn to the outer part of the left sleeve. The upper point of the chevron should be placed at a distance of 80 mm from the shoulder seam. On the camouflage sign sewn on the center of the pocket, located on the sleeve. An emblem indicating a link to a particular unit is placed on the right sleeve.

And chevrons of duty services and forces sew on the left area of the chest, having retreated from the ribbons of orders down 10 mm or in their place.

Current issues

So, from which side is the chevron attached? The general sign is sewn on the left, and on the right there is a chevron pointing to a specific garrison. When the conversation is about the Ministry of Emergency Situations or Interior Ministry, the general image is attached to the left sleeve, the symbolism of a particular unit is on the right.

How to sew a chevron on the tunic of a serviceman, many readers already guess. The sleeve is traditionally attached to a range of 8 cm from the top of the sign to the shoulder seam. Here experienced servicemen usually use a "hidden" seam. So you can sew a chevron speciously: and the threads will not stick out, and the overall shape of the shape will not spoil. As you can see, we not only established how to sew a chevron (Russia) on a tunic, but also determined the places where it should be placed. There are armbands that are fastened either at a range of 8 cm from the shoulder seam, or in the center of the pocket on the sleeve. There are chevrons, which are located in the center of the breast pocket.

The graphic sign of the troop type is on the left sleeve, and the division sign is on the right. Chevrons are attached to both sleeves. On the left is usually a patch of the kind and kind of troops, on the right - the sign of a particular unit. The image is always pruned from the outside. Breastplates are located at a range of 5 mm. In general, chevrons can be sewn on the sleeve, chest and back. By the way, the general badge of the Ministry of Internal Affairs is on the left, and the sign of the private unit is on the right. We hope that after studying our article, you can always properly style chevrons on a tunic.