How to refill a Canon cartridge: instructions and tips

One of the undeniable advantages of any inkjet printer is its relatively low cost and the ability to print color images. Laser analogs, which allow data output in color, are much more expensive. However, as is often the case with inexpensive products, the price of consumables is often commensurate with the cost of purchasing the entire device as a whole. In this case, it means that after the ink is exhausted in the cartridges that come with the printer, the owner is forced to purchase a new kit. However, there is a solution that allows to significantly save on such acquisitions. It is enough to understand how to fill cartridges yourself - and you can save a very large amount.

Prerequisites

This feature has become known for a long time, almost simultaneously with the appearance of the first models of inkjet printers. The meaning of this operation is the self-pouring into the capacity of the empty ink cartridge, which makes it possible to reuse it. The number of such refills is determined by the design features of the container and printer, the accuracy of the operation and the colors used.

The printing mechanism of the inkjet printer is quite simple: in the head, which is moved perpendicular to the passing sheet, there are microscopic nozzles-nozzles, to which ink is supplied from the reservoir. At the command of the controller, one or the other of them squeezes out drops of coloring matter and fall onto the paper, forming the required image. Inside the container there is a porous material holding the ink. Depending on the modification, the print head can be combined with the capacity, and also be a separate unit.

Cartridges Canon

Although, theoretically, all the jet strips allow re-filling the porous material with paint, in some cases this can be difficult. So, manufacturers in various ways are struggling with this possibility, since such an interference in the printer deprives them of the profit from the sale of the filled cartridges. Firm Epson puts chips, HP is inconvenient, but the easiest way to figure out how to fill a Canon cartridge. In addition, time-proven Bubble Jet technology, when ink is extruded by thermal expansion, guarantees long-term operation of the printer. Next, we show the order of refilling the devices of this particular company.

How to refill a Canon cartridge

First of all, you need to prepare everything you need. To do this, you need to visit a computer equipment store and ... a pharmacy. No, not for aspirin. There's nothing complicated about how to refill a Canon cartridge . You should buy:

- Inks of the right colors and types. Their number depends on the printer model;

- the same number of syringes with thin needles;

- clean dry napkins and cotton wool;

- thin polyethylene gloves to protect hands from paint. They can be taken in supermarkets or from hair dyeing kits.

After all this is purchased, you can understand further how to refill the Canon cartridge. The table, on which the filling of the coloring liquid will be performed, should be covered with several layers of the newspaper. Then it is necessary to open the cover for changing the cartridges on the printer (indicated in the instruction) - the carriage will bring them to the accessible area. Further it is recommended to read the designation of the color cartridge and to find on the Internet the correspondence of the holes and colors in order to know which one to fill. After that, following the instructions, you need to remove one of the cartridges. If it is integrated with the printhead, care must be taken not to touch the nozzles. Carefully remove the sticker, type the color of the desired color in the syringe, insert the needle into the cartridge halfway and slowly fill it. Usually 2-3 ml is enough. It is not recommended to exceed the norm - excess will only hurt. After that, you need to return the sticker to its place (although it is sometimes discarded) and insert the cartridge into the printer. Repeat the operation for other containers. It only remains to test the nozzles and clean the heads in the printer driver menu.