Cedar barrel is the best medium of folk medicine

From time immemorial it is known about cedar that it has medicinal properties. Having collected this knowledge and knowledge of ancient bonders Company "Rodnik" http://fitorodnik.ru/ organized the production of cedar mini-saunas called "Cedar barrel"

For the production of phytochemicals "Rodnik" a healing Altai cedar is used, cutting down takes place in the Altai mountains. The manufacture of cedar barrels is done by professional carpenters and bonders.

Before the cedar barrel falls into the hands of the end consumer, there are many stages:

1. First, sampling and sanitary cutting of the relic Altaic cedar occurs

2. Further, the removal of the round timber of cedar from the site in the mountain Altai (only 4 months per year are allowed)

3. The roundwood falls on the sawmill and only the part of the trunk is selected for the production of phyto-beaks (the first saw)

3. The broom is transported to the sawmill and spread to a non-edged chip

4. After sawing the board is again sorted by the technologist according to GOST of the Russian Federation

5. The best selected board is transported to the drying chamber

6. Loading of the block into the drying chamber is also controlled by the technologist.

The boards are laid out on spacers (dimensions 35x45 mm)

7. Next, I start the pallet with the cedar board in the drying chamber

8. The joiner board is dried to 6% humidity.

9. The drying technology is very complicated (double humidification in the chamber is necessary)

10. Before moistening, the lumber is heat treated.

11. Drying occurs until the moment the humidity is 6%

12. Then the timber is transported to Novosibirsk in the carpentry shop.

13. In order for the board to retain its shape after drying, it is also distributed in the shop to the gaskets

14. Before the production of the barrel, the number of rivets is calculated, and according to the drawings the board is cut out according to the figures.

15. The boards are selected strictly by color.

16. Next, the board fuses and mills.

17. Is going to billet

18. After the preparation of the workpiece, the product is polished and the joints are adjusted

19. Door openings and a door on the lid are cut out

20. Filling is performed: a barrel-sized seat, a grille for the legs, armrests, seat holders, casing for the door and the lid are manufactured.

21. Install door handles and handles on the lid, bolts inside

22. Hinged doors and covers from above (on the hinges of stainless steel)

23. The latch locks on the door are made of stainless steel

24. In the paint chamber The product is covered with natural beeswax with a brush and rubbed with a special sponge

25. Made and dressed hoops of stainless steel that are fixed with the help of tightening screws, from the back side of the phyto barrel (with the drying they can be adjusted)

26. All the sawdust is removed from the barrel and the phyto-paste is sent to the packaging.

27. The barrel is packed in stretch film and cardboard, then the crate is manufactured.

28. Last stage - the phyto-tea is taken to the transport company for delivery to the destination of the buyer.

Observing all stages of production, the customer receives a quality product at the manufacturer's price.

The sizes and types of phytochemicals "Spring" is very large, any buyer can choose for himself a suitable Cedar barrel. It is also possible to order the production of cedar barrel in its size. Products are impregnated with beeswax on German technology, hoops and hinges are made of stainless steel. The barrels are assembled on a spike groove.

The company "Rodnik" is engaged in the manufacture of mini saunas for 11 years, and has established itself in this industry as the largest producer in Russia.

Products can be ordered from the shop in Novosibirsk, delivery through the carrier "TK"