Car jack-up jack 2 t: reviews

A jack is an indispensable tool in the arsenal of any auto mechanic, locksmith and just an economic home master. Although it is often and fairly justifiably called an adaptation for performing automobile works, the range of possibilities for using a jack is much wider. It can be said that this is a universal tool used in various repair, production and construction activities where additional effort is required. A standard lifting jack, with 2 tons of effort to cope with the lifting of cars, is the most common representative of this family.

Features of rolling jacks

In general, the principle of providing the effort completely corresponds to the traditional hydraulic bottle models. The difference lies in the construction of the jack, which is complicated by the movable platform. Actually, this decision is due precisely to the desire to improve the ergonomics of the tool when working with tire fitting operations. By the degree of convenience, it is possible to compete with this design only with a jack "T-Max", which takes up a minimum of space, but at the same time produces the same effort.

As for the 2-ton load, it is the minimum and standard for this type of jacks. Less common is the option for 3 tons and even less frequently there are models for 5 and 10 tons. In the field of application, a hydraulic jack for a rolling 2 t can be considered as a multifunctional one. He easily copes with the tasks of lifting most cars and other equipment within the designated load capacity.

Reviews of models Matrix

Tools of the company Matrix are known for their reliability and durability. But in the case of jacks, the situation is somewhat different. At the forefront of the lists of positive feedback goes ergonomics and, in general, the process of handling adaptations. In particular, there is a rapid, confident and high recovery. Structural diversity can also be attributed to the pluses. As for the minuses, then, as noted by the same users, a rolling jack (2 tons) from the manufacturer Matrix weakly holds the load. And this does not apply to situations with a clear excess of the weight of the cargo in relation to the recommended 2 tons. Even VAZ cars are not always kept by this jack. However, if it is a question of short-term operations, then this option will do - all the same, there are no serious gaps in quality either.

Comments about Gato models

The manufacturer Gato deserves attention precisely because of the successful rolling jacks. The tools of this line use special constructional mechanisms that facilitate the work process of the mechanic. So, the owners point out the convenience when moving the site. Rollers and guides are made of high-strength materials. They easily and smoothly lead a massive platform. Also noted are the advantages of the supporting bowl, which necessarily provides a jack podkatnoy. The reviews emphasize that the toothed surface allows optimal fixation of the restraining device with the prevention of the risk of slipping.

Reviews of models Goodyear

Another confirmation that American manufacturers of tools make the best quality products. Models Goodyear differ not only reliable in terms of operation materials and functional mechanisms, but also demonstrate the optimal combination of parameters of different parts. The car owners note that the rolling jack (2 tons) has a comfortable handle, extended wheels and rubber supports. These seemingly small nuances in practice are always very useful. To this we should add the advantages of the equipment. The manufacturer supplements each copy with spare seals. True, it does not do without unpleasant surprises. Some owners after winter exploitation find traces of corrosion damage, which indicates the use of protective coatings of poor quality.

Comments about Sparta models

The products of this company can hardly be called premium, as evidenced by significant limitations in working technical parameters and medium-quality materials. However, to perform simple operations with lightweight objects this option is useful because of its compactness. This is a small jack rideable, reviews of which mark a low level of recovery, but at the same time, maneuverability when handling the platform. That is, for the same cars without additional load, Sparta products can be a good idea. True, do not expect that the tool will help in solving the full range of tasks that other 2-ton models are capable of. In this case, it is better to immediately focus on the jacks, which have a lifting capacity of at least 3 tons. The fact is that in competing models, as the tonnage increases, the dimensions of the work platform with a subcurrent increase, and in this case the same compactness is maintained.

Reviews about models "Zubr"

Domestic manufacturer "Zubr" has long and successfully competed in the market of tools with products of imported origin. Both builders and auto mechanics are increasingly turning to this brand at least for the reason that its models are much cheaper. In this case, a rolling jack for a car is not just cheaper, but it will also provide a full range of functions that are expected from a tool of this class. To the peculiarities of this line, many consider the possibility of working with cars, which have understated clearance. There are reviews that the rolling platform of such a jack is capable of working even with sports cars, while maintaining the same stability in retention.

How to choose a rolling jack (2 tons)?

In addition to the load-carrying capacity, professionals recommend such parameters as lift height and pick-up capabilities. The climb can reach 600 m, but this is typical for models designed to work with trucks. The standard values on the average correspond to 300 mm. This is the initial level for the height of the lift, which provides the bulk of the 2-ton models. However, there are exceptions. For example, a hydraulic jack under the rolling Matrix with a lifting capacity of 2 tons is capable of raising the object by 385 mm. I must say that for a conventional tire service this may be too much, but for a universal auto repair shop - it is quite suitable. Now you can move to the height of pick-up. This value determines the already mentioned ability of the tool to serve machines with low ground clearance, that is, ground clearance. The minimum value is about 65 mm, and the standard is in the region of 90-100 mm. The first indicator is suitable for the maintenance of sports cars, and the 100 mm lifting height allows you to work with most conventional cars. Accordingly, the increase in the parameter gives grounds to classify the jack as a model for trucks.

Conclusion

Not all models of rolling type with a carrying capacity of 2 tons can perform universal tasks of a car workshop. First, we must take into account the limitations imposed by the platform on the wheels with the guides. Secondly, a rolling jack (2 tons) is initially calculated for the design of cars, so it is advisable to purchase it for a specific model of the car. If the tool is selected with plans for servicing different cars - for example, in a workshop, then it is preferable to orient oneself on a version with expanded values for picking up and lifting height. This will allow you to perform work with a wider range of different cars. As for the load capacity of 2 tons, then, of course, it is not suitable for covering the category of trucks, however, some models of crossovers and station wagons will be fully serviced.