Water softener "Akvashchit" without resin and salt

The most commonly used means for softening lime water are resin and, in the old fashion, soda. But in today's realities, the relevance of the use of these tools has to some extent suffered. Progress in the softening and purification of water has gone so far that even resin filters do not always withstand competition.

Softening and Cleaning: Rescue from Pollution

Today's realities force consumers not to pass by the developments and achievements of science. And, as history shows, the sad experience is the stimulation of the creation of any cleaning or softening apparatus. The urgency of using continuous water softeners is very easy to prove:

• They make water more useful.
• They save money.
• With them, the life of the equipment increases.

Soft and pure water is a synonym for health. And not only for man. The "health" of the equipment depends largely on the water it is used for. Any contamination can lead to breakage, and is very significant. Thus, the formation of calcareous hard plaque affects the surface very badly. Forms its application of hard water. When heated, harmful calcium hard salts fall into a pesky sediment and stick tightly to the surface. And the later this sediment is eliminated, the worse.

Over time, the plaque becomes hard, like gypsum. Remove it with acid solutions is possible, but then the surface will remain ugly, nonsmooth, with the remains of scale. And the further this surface is used, the worse will be its condition. The service life will start to decrease catastrophically. Water softening methods are designed to solve this problem.

Ion-exchange filter VS water softener "Akvashchit": who is whom?

The use of resin as a softener has become available to the consumer not so long ago, just one century - a hundred years. And this method of softening effect of water was exploited long enough until a competitor appeared in the form of a filter from the scum of AquaShit and, in general, the electromagnetic effect. However, when comparing, it becomes clear that there is no single winner in this struggle. And much depends on the end user.

What is so remarkable about the ion - exchange water softener ? First of all, the best quality is directly eliminating hard salts. "AQUASCHIT", as an appliance, puts forward, as a competitive advantage, the removal of sediment, even old and very dense, without the involvement of manual human labor.

How does the resin show itself when exposed to contaminated water? In the resin, there are a large number of sodium salts ready for metabolism. And in the water there are salts that are attracted by pitch. When they come into contact, the same ion exchange occurs. The water becomes much softer. If the degree of softening is insufficient, water can be passed through the resin filter repeatedly. This is the basis of the principle of ion-exchange water softening. Hence the high quality of the resulting soft liquid.

In a reagentless device, completely different forces are involved in water softening. The electromagnetic wave field, irradiating water, causes it to produce a stunning effect. It should be noted that simple irradiation even with a simple strong magnet helps:

1. Make the water softer.
2. Eliminate the old scale without external interference and additional costs.
3. It is easy and at ease to operate the cleaner.

The wave theory causes the shape of the hardness salts to undergo changes. However, the methods of their work remain the same. Calcium salts still want to stick to the heated surface. But a new form (thin and sharp needle) prevents this. It turns out that there is friction, and sharp ends, but no adhesion. This is where the magic effect of removing the old scale comes from. And with this feature of the work of this method of water softening, the lime scale can be eliminated in any, even the most inconvenient and inaccessible place. And you do not need to disassemble, untwist the equipment, stop the work of the whole complex, losing thousands of money.

Home handy tools or installation of a softening filter "AquaShield"?

The other side of the coin is the desire of any consumer to save. And everyone wants to do this within reasonable limits. Is it worth it to try and mount an expensive device for cleaning low-quality water, when it is easy to find salt for softening water in every house? This is where the subject for disputes is formed. Is there an effect of such a purge system? Simple salt and hardness? Or soda, or maybe vinegar? Or will the advertised Coca-Cola help?

Bitter life experience says, alas, about another. Any improvised material, whether it is manganese or gauze, will never give the effect of high-quality cleaning with the help of powerful salt reagents, not that of softening. You can not compare such different substances. Too great a chasm in the effect of the application. But all the same and throw off home money can not.

Soda for a washing machine or vinegar for a kettle will help:

• Eliminate light calcium-magnesium plaque.
• Clean the surface of the old plaque.

If a person is limited in means, then his choice, as a minimum, should be soda. This is the only more or less working, preventive remedy for harmful calcium-growth outgrowths. And in order to maintain the condition of the surfaces in a more or less pure form, you need at least once every 6 months to do preventive washing with soda solution. This will not help to eliminate the hard plaque, but at the initial stage at least minimally protects the surface. And the consumption of tar and salt at the same time is quite small. As for salt, its use is very similar to soda, just the latter works more visually and effectively. While the salt, in addition to boiling, does not give any effect.

In terms of price, of course, such a water softening filter, like " AquaShield" , will lose a very cheap salt beforehand. But is it worthwhile to contrast the improvised salt with a quality softening effect? Salt, like vinegar, is just a preventive, inhibiting the process of fouling means. A cleaner is a way to prevent the formation of deposits on the walls of equipment. This is the solution to the problem even before its manifestation. It is simply incorrect to compare these methods and means.

In one, these means of purification converge - they are easy to apply. Salt is enough to dissolve in water and boil the same pan with this solution. And when working with a softening plant, you do not need to change anything, reinstall to check the softness of the water. Electromagnetic devices are so good that they only need to be installed on the pipe. And while the quality of the pipe material, the material itself, the device is not important. It will create its most powerful and harmless field on any material.

Such a device does not need replacing and cleaning. And after some couple of years it will not have to be changed urgently. And you do not need to restore it, like a cartridge in a cation-resin device. It is very easy to work with an electromagnet. And this is noted by all consumers.

Magic softening effect is sufficient for complete safety?

With all the advantages of the water-free water softening system "Akvashchit", it is not ideal in working with drinking water. And a person, as is known, needs to use every day technical water and water to ensure his normal life. That is, cooking, washing - from these needs and responsibilities the consumer can not escape. So, you need one device or two? Is it worth buying several filters, if you can take the device "Akvashchit" more power? With this turn of events, every person who decides to buy a cleaning plant faces.

When solving this problem, one should remember to everyone that nobody requires drinking water from technical water. In this respect, the acquisition of the second device will no longer seem so wasteful. Moreover, when calculating it turns out that it is economically more profitable to buy two devices, and each of them to direct to work with this or that water. Especially if one device is electromagnetic, and with it there will be absolutely no trouble with regard to replacements, restorations, etc.

The main thing is that softening the water in this way will help to guarantee whole internal surfaces to household appliances located in the risk zone. When the scum remains on them, the transfer of heat with every minute becomes worse and worse. Scum, lime, is a dielectric, a heat insulator. No absorption, no transfer. And, consequently, all heating with the help of any heat source remains inside the surface. Even if it is made of the most hardened cast iron or steel, constant curing will lead, after all, to a deafening explosion. From here and that obsessive desire of any engineer of heating systems to prevent the formation of sediment. And the salt here is certainly not an assistant, as well as soda. Only a good, high-quality filter is needed here. He will keep all the salts in himself, turn them into another state, but will not settle on the surfaces, exposing them to the same great risk.

It is noteworthy that the use of two softening units, one of which "Akvashchit", will easily pay for itself during only one calendar year. Therefore, the consumer should always be able to soberly weigh their risks. It is better to save up, collect, take a loan, but drink only that water that will contribute to good health. And it will not be a notorious headache.