Polishing the watch glass. Effective methods for eliminating scratches

Even with a careful attitude towards personal things, pollution can appear. New wristwatches can also be scratched for any details of clothing or foreign objects. Only for the breakage of the accessory is it necessary to replace the glass and other types of work. Small scratches can be eliminated by yourself, if you use simple rules.

Rules for the elimination of shortcomings

On the glass usually there are scratches, chips. Since wrist watches are considered a fragile object, it is necessary to treat them carefully. They also need to be constantly taken care of in order to prevent deterioration of appearance.

Polishing of the glass from scratches should not be done with paper. Even if it was advised to use someone from friends. Now rough and dense paper is produced, as well as ink with pollutants. Therefore, this effect on the glass adversely affects the matte and glossy coatings.

The procedure for clearing glasses is a special science. After the work is completed, the surface should not be wiped with a dry rough cloth, especially if hot water and aggressive cleaning agents are used. But a soft material, for example, gauze or fiber, is perfect.

Polishing of the watch glass can be done with the help of laundry soap. But it is much better to use a special tool that will ideally clean the surface. If washing or cleaning powders are used, you should be sure of the complete dissolution of the abrasive particles. The work should be done carefully.

What is not worth using?

On the Internet, you can find many recipes to eliminate scratches. Many landladies recommend using sandpaper. The material is really used for a variety of economic purposes, but in this case it will not be an assistant.

Sandpaper has a rough surface, and so many small scratches can be created. Then we will have to find a way to eliminate new shortcomings. Therefore, it is better to choose the tested method immediately.

Toothpaste

Polishing of the watch glass can be performed with toothpaste. Only it should have a bleaching effect, because it includes many abrasive substances. To clean the surface, you need:

• Take a little paste with a cotton disc, after which you can wipe the desired area with circular motions;
• Then by the same movements, but in the opposite direction, it is necessary to wipe the glass;
• After drying the paste, you need to wash the surface.

This method effectively eliminates small scratches. Deep damage can not be removed, but the appearance of the glass will be better.

Paste GOI

Polishing of the glasses is effectively performed with the help of GOI paste. In ancient times this remedy was used to clean many surfaces. But there are many fakes, so you should choose products carefully. If it turns out to choose a quality product, then you can proceed with the work:

• Pasta must be melt with a water bath, because it acts better in warm form;
• To apply the product you need to use a felt cloth or cotton pad;
• Should wipe the damaged surface, and if not cleaned, then perform the work again.

GOI paste perfectly copes with the function of removing scratches. And the agent can be left to clean the surfaces of other products.

Mineral oil

The polishing of the watch glass is perfectly executed with the help of felt material and mineral oil. First you need to determine the material of the product. Glass can be organic, natural and sapphire. For watches, the first option is usually used.

The glass should be removed from the watch, and then gently cleaned with felt and polishing paste. Also polyrite and crocus are suitable for this. After work, the surface should be washed with water and treated with mineral oil. This simple method will update the product. It can be used regularly, so that the accessory always looks like new.

Treatment of natural glass

Polishing of the glasses of this type is performed using a grinding machine. Without it, purification can not be done qualitatively. The polishing wheel is put on the machine, and then the GOI paste is applied to it. It is necessary to turn on the device for small turns.

During work, it is necessary to press the glass to the circle. Polishing should be performed from the edge of the glass to the center. To the surface became transparent, but should be applied a little mineral oil. Remains must be eliminated with alcohol. As a result, you will get transparent glasses of hours.

Purification of sapphire crystal

The surface of this species is quite firm, and at the same time brittle. It easily scratches, and therefore any objects damage it. In order not to spoil the watch, you should take care of the product.

If scratches have appeared, then work requires a diamond paste. The agent should be applied to the polishing wheel of the machine. The rest of the work is done just like with natural glass. The procedure should be carried out carefully, and then there is no need to replace the glass.