How to decorate a doorway without a door: options, materials, design ideas

Making a renovation in their own apartment, the owners try to use all possible design techniques to increase the space of small rooms. To this end, many refuse to install interior doors, thus uniting several rooms together. This solution allows you to expand the boundaries of the room and make it more spacious. But how to arrange a doorway without a door to make it a real decoration of the interior, we will consider in our article.

Design options for the opening

So, if you decide to refresh your interior by decorating the doorway, then first we recommend to determine its future shape. It can remain rectangular, acquire the shape of an arch or acquire additional angles. In any case, the design of the interior passage should fit well into the interior of both rooms. That's why do not immediately go to the store for decoration materials, which in the end will be completely useless. In order to successfully draw a doorway without a door with your own hands, first of all you should sketch a sketch of the future design. Let's consider the most popular ways of registration of passages between the next rooms.

Wall apertures

This is the most popular and most simple design that you can do with your own hands. In this case, the input retains a rectangular shape, but is supplemented by a more massive finish with a variety of decor elements.

Usually, to arrange such an opening, it is necessary to remove the door leaf, dismantle the box and remove all the structural elements of the former door. The resulting pass is leveled and finished with selected materials. Rectangular apertures are suitable for both small and large rooms, while the style of their design is often strict and restrained.

Arches passages

Door archways often have a classical form. In this design, the arched arch is made in the form of a semicircle, the radius of which is half the width of the passage itself. Oval apertures are quite popular and easy to perform. However, before choosing this option, pay attention to the height of the ceilings in your apartment. In rooms where the height of the walls does not exceed two meters, it is strictly recommended not to make out a rounded opening, as it visually lower the ceiling even more.

It is better to give preference to the arch in the form of an ellipse. This option is optimal for rooms with low ceilings, as the special shape of the arch allows you to visually increase the height of the walls.

Openings of irregular shapes

If the simple forms do not satisfy the owners' requests, you can experiment and create a more complex version. Since there are no strict rules in modern interior design, the shape of the passage can be the most unusual and even slightly bizarre.

Often set arches in the form of a trapezoid, a triangle, a semicircle and various asymmetrical configurations, with oblique inclinations to one side. It is also possible to combine several shapes. For example, when a rectangular portal is supplemented by rounded corners of a different radius. This design is used only in cases where the width of the doorway is greater than 80 cm.

Often, in modern design projects you can see unusual openings, equipped with a spotlight, side shelves or bar counters. This approach not only decorates the room, but also makes the passage between the rooms a functional element of the interior.

Particular attention deserves the design, decorated with colored glass, stained glass or mosaic fragments. This design is very difficult to perform independently, therefore in most cases this job is trusted by professionals. It should be noted that complex and curved arches can be installed only in cases where the width of the doorway is greater than the standard one. Most often, this design is used in apartment-studios. In small and low rooms it is better to give preference to a strict classical style.

After you have clearly decided on the shape of your passage, you can proceed with its decoration and the choice of decorating elements. Let's start with the choice of material.

Design options

Thinking about how to make a doorway without a door, study all possible options for the finish and choose the one that best suits your interior.

Today the following materials are actively used for these purposes:

• tree;

• decorative rock;

• polyurethane;

• decorative plaster;

• plastic;

• interior blinds.

What is each material and how to use it to make a doorway, consider in more detail.

Tree

The most noble and effective is the finish with the participation of natural wood. Here, the most valuable tree species can be used, such as ash, oak, mahogany and hornbeam.

These species are distinguished by presentability and durability, but are too complicated to process and have a high price tag. That is why the most popular products today are pine products. It has an acceptable cost, is durable enough, has a beautiful structure and, most importantly, can be easily handled.

Such arches are sold in the form of finished products, which can only be installed in the right place.

As an alternative to natural wood, MDF panels can be used. They are lightweight, affordable and have a wide range of colors.

Plastic panels

Plastic finishing refers to economical options for decorating openings. The material is easy enough to work, since it does not require preliminary preparation of the substrate and is attached to ordinary liquid nails.

Despite its simplicity, the plastic panels look very presentable. They emphasize the severity of the interior and create a contrast in the opening area against the background of the adjacent walls. This design is convenient and because the plastic is resistant to moisture, and therefore can be used near the kitchen. Plastic finishing can be done by anyone, since even if any mistakes are made, the spoiled element can easily be replaced.

Polyurethane

If you are thinking how to decorate a doorway without a door beautifully, pay attention to the decor of polyurethane. This is quite dense, but at the same time, a flexible material that is used to create a simulation of heavy and costly gypsum stucco. This design looks very attractive, while it is much cheaper than tiles and decorative stones.

Polyurethane stucco fixing with a special glue on a variety of surfaces. The light weight of the material makes it possible to use it even on plasterboard structures. Initially, the decorative elements are white, but can subsequently be painted in any shade.

With this material, the doorway can be decorated with rounded or square columns that expand upward. If a small room or its design does not fit into the massive elements, you can decorate the walls with more elegant moldings of the same material.

Fake diamond

Decorative stone is distinguished by its ability to bring sophistication to the interior and emphasize the high prosperity and good taste of the owner. Today, in the construction market, you can find a lot of varieties of this finishing material, differing in color and texture. Of course, this finish can not be called economical, but these costs are justified, because the artificial stone in the interior always looks luxurious.

Decorating the doorway with a decorative stone will require a lot of effort, but the result is always impressive. In most cases, they are faced not only with a passage, but also with a part of the walls adjacent to it. Here you can apply both symmetric and asymmetric design. If the doorways are located close to each other, they can be issued in a single style. Effectively looks smoothly passing lining from one aperture to another.

If you decide to use an artificial stone in the interior of your apartment, pay attention to the weight of the material you selected. Some types of stone imitation can heavily weight the doorway, which makes it impossible to use them on plasterboard structures. In this case, it is better to give preference to variants from gypsum.

How to make a stone finish yourself?

1. First you need to prepare the walls. If there are large irregularities on the surface of the base, they are removed with a putty.

2. Next proceed to knead the glue. If light variants were chosen for the lining of the opening, they are attached to ordinary liquid nails. The heavier varieties, like clinker tiles, are fastened to a solution of cement, glue, lime and sand.

3. The lining of the opening begins with the lowest part of the wall. The product is leveled, spread with glue and pressed against the wall. If you do not want to additionally seal the joints of the stone in the corner parts of the opening, the material must be lapped. A brick of the first row is placed close to the opening, and the element of the next row is moved inward, at a distance equal to the thickness of the finishing material. Thus, alternating rows, perform the design of the opening.

Curtains

If in the near future in your plans does not include repair of the apartment, but so want to bring in the interior fresh notes, show sharpness - hang curtains on the doorway. This move will simultaneously decorate and, if necessary, hide the passage between the rooms.

Fabric curtains successfully look at the openings of absolutely any geometry. The main thing is to pay special attention to the choice of colors and textures, so that they harmoniously fit into the interior of the room. Otherwise, there are no restrictions. Interior curtains can be weighty with lambrequins, drapery or restrained and light.

If the interior of the apartment is decorated in an oriental style, then bamboo canvases come to handy . Products from natural wood with a variety of chopsticks and beads will be an excellent decoration of the doorway. This option is also attractive because it does not accumulate dust in it and does not interfere with air circulation between rooms.

Choosing curtains on the doorway, pay attention and thread options. They are presented on the market in the form of fabric cords, which are supplemented by various glass, shells and stones. Textile products can cover the entire passage or be used as its frame.

This method of registration is attractive in that it can be done easily with your own hands, and the affordable cost and variety of options allow you to change the design of the interior opening at least every year.

Decorative plaster

Another simple way how to decorate a doorway without a door is to finish with decorative plaster. It will suit those owners who wish to do the work with their own hands, since this process does not cause special difficulties even for inexperienced masters. This design is considered quite durable and unpretentious in care. The dried surface can easily be painted in the right color, so that the opening will fit well into any interior.

Before applying the solution, the base is leveled and the hats of the fastening elements are masked. Then the opening is treated with a primer, after which the decoration composition is applied. With the help of special rollers and dies, the solution is given the desired relief. After drying of the plaster, it is stained with coloring compounds or covered with finishing solutions.

Conclusion

Apparently, there are many ideas how to decorate a doorway without a door. When choosing the right style, you can turn to specialists for help, or you can create your own and unique design project. The main thing is that all materials used in the interior are harmoniously combined. Only in this case you will be able to create an original and attractive design style of the doorway. We hope that the information you read was useful to you, and the photos posted in this article helped you with the choice of the best option for decorating the passage between the rooms.