Ceramic heating panels: photo and reviews

Ceramic heating panels are a modern alternative to classic radiators. The transfer of heat is carried out with the help of electricity or water, and the panel itself can be located outside the suspended ceiling, above the floor covering and on the walls.

Device

The equipment is rather complicated. The heating device consists of several layers of innovative materials:

1. The body of the device is made of a polymer heat-accumulating coating, which can be heated up to 90 ° C. Thus, the ceramic panel emits thermal energy into the room by convection.
2. A heating element.
3. The display element is a kind of screen that redirects the heat rays from the body to the room.
4. The ceramic panel itself, which is capable of heating up to 80 ° C.

Principle of operation

Equipment of this type distinguishes two types of energy: radiation and convection. Most importantly, the ceramic heater emits infrared rays that heat objects that surround the panel. This is the most effective variant of the heating system.

Types of panel heating

Under panel heating means systems of various types. They share a common feature - heating the surfaces of the room and the lack of radiators. Depending on the type of coolant, electric and water heating are distinguished.

Water

Water panel heating represents a system of pipelines with hot water under a wall or floor covering. Most often this system is used for flooring than for walls.

Thanks to the warm floor, a person feels comfortable even in the coldest weather. The floor is pleasant to walk, its installation is carried out throughout the area of the room, so there are no warm and cold zones. At the same time, its temperature should not be more than 30 ºC, otherwise it will not be convenient to walk on it.

The disadvantages of this system include the difficulties of installation - this procedure requires the dismantling of the old screed, the laying of pipelines and the insulating layer. In the event of any malfunctions, such a system is very difficult to repair, as it is necessary to remove the screed and the floor covering.

Electrical

At the present time, pan-radiant heating is gaining in popularity - it is an improved heat distribution scheme. If the classic radiator heats the air, the heat of which is transferred to the surrounding objects, then the infrared ceramic panels give heat to the objects that carry it forward.

In most cases, the following heating appliances are used:

1. One of the most economical types of heating devices are STEP panels. Their body is made of a galvanized metal box, inside of which is a reflecting heat-insulating layer and a powerful heating element. Radiation from the device heats objects that are in the room. It can be used indoors for any purpose, as it is completely safe.
2. Ceramic panels that combine an infrared heater and a convector. The front panel is made of glass ceramics, with a low energy consumption, the heating element has a high heat transfer coefficient. On the back side there is a heat-accumulating coating providing natural convection.
3. EINT panels are infrared long-wave heaters. There are wall, floor and ceiling panels, they can be installed in private homes, apartments and offices. They are safe and reliable, do not create fire hazards and do not dry the air.

Advantages and features of ceramic panels

1. These are compact devices.
2. The ceramic panel-heater does not dry the air.
3. The coefficient of efficiency is of the order of 97-99%.
4. Dust does not rise during operation.
5. Ease of installation.
6. These devices do not pick up dust.
7. Do not burn oxygen.
8. Double principle of heat release.
9. Energy saving.
10. Heating is carried out by means of a soft heat flow.

Saving

Ceramic panels are able to completely replace radiators, the heat from them will be more than enough for comfortable feeling. Due to the high heat transfer coefficient, the energy savings of these heating appliances can be as high as 30%. The consumption of electricity per 1 m ² reaches only 50 W, while the consumption of a conventional radiator is more than 100 W per 1 m ² . Reducing the flow rate is due to the convection type of heating and the ceramic element. In addition, in order to avoid overpayments for excess heat, it is recommended to install thermostats on ceramic heating panels.

Security

When choosing a heating appliance, safety is an important factor, especially if there are small children in the house. Ceramic panels are not heated, because they consist of environmentally friendly materials. Also the design does not provide the presence of projecting parts.

Panels are not afraid of penetration of dirt, dust and water. Therefore, these heating devices can be installed in rooms with a swimming pool, bathrooms, etc. Ceramic heating panels are not afraid of overloads in the electrical network.

Ecological compatibility

In this heating device, the heating element does not come into contact with air, so that oxygen is not burned and air is not dried. This is especially true for those who suffer from respiratory diseases.

Ceramic panels (customer reviews confirm this) do not emit harmful substances, do not emit unpleasant odors and are completely silent. Such equipment can be installed in children's rooms.

Durability

Durability is the parameter that every consumer would like. Ceramic heating panels are arranged in such a way that the resource of consumption is increased several times, since the equipment is insured against accidental damages, external influences are not afraid of it.

Design

The design of the heating devices allows them to perfectly fit into any interior. Low-key colors, laconic lines make them versatile, this equipment does not disturb the aesthetics of the room.

Ceramic heating panels: reviews of specialists

As already mentioned above, the heating of the premises is due to soft heat flows. Doctors say that this is an ideal condition in which the human body feels comfortable.

Durability, reliability, watertightness, explosion safety and fire safety make it possible to use these heating appliances in office and residential premises of any destination as auxiliary or basic heating (cottages, cottages, houses, apartments, modules and trade pavilions, as well as public and municipal facilities) .

Installing ceramic heating panels (reviews confirm this) in preschool and children's institutions (bedrooms, playrooms), you significantly increase the comfort of children's stay, as well as reduce the risk of colds. To ensure additional safety for children, these devices are equipped with protective screens. The lack of protruding parts and low surface temperatures make ceramic heating panels absolutely safe for children of any age.

The absence of cavities and cracks prevents the accumulation of dirt and dust, which provides convenience and ease of care for heating devices of this type. And most importantly, there is no need to periodically paint the radiators. It is enough to wipe the surface with a cotton cloth and detergent that does not contain abrasive components.

Many consumers noted the ease of installation of these heating appliances. In a room of about 60 m2, this heating system can be installed in one working day. Also, the installation can be carried out in stages, which is especially convenient in large areas.