BMX: Characteristic, Bike Selection

Extreme sports are not just parkour, mountaineering or parachuting. They also include tricks on a bicycle. There is even a special kind of it, modified specifically for performing all sorts of jumps, jumps, coups, flights and the like. All this can be done if you ride a BMX bike. What is this miracle horse? To answer this question, it is necessary to consider what the BMX has about the characteristics of the exterior, what it is capable of, the features of the structure and its difference from a track or, for example, a road two-wheeler.

What is BMX?

The first thing is a bicycle, but not an ordinary one. In its structure, it differs from others, so it was assigned to a separate class. His destination - the trick elements. That is why when it was created, the designers made certain amendments that were designed to increase the durability and reliability of the structure.

BMX: Bike characteristics and distinctive features

Unlike their mountain "colleagues", such large ones do not have shock absorbers at all. They do not install a suspension, because they do not need it, and besides, it weighs a lot. When jumping, the shock absorber may interfere with the trick. Therefore, we decided to simply remove it.

Also, you can immediately see that BMX refers to singlespids. This means that he only has one speed, not several, as, say, mountain bikes. Again, all this is removed for complete uselessness. Such a transmission will only increase the weight, which will negatively affect maneuverability. By the way, it should be noted that the rear and front sprockets do not have a certain standard. They can be of different sizes. The magnitude of the asterisk depends on the number of denticles located on it. The owner can change them if he needs the BMX to develop a particular speed. Everyone can adjust it to certain parameters.

Of course, one of the main indicators is weight. You can draw a parallel with mountain bikes. The standard BMX, whose mass characteristic is positioned as an average, weighs about ten to eleven kilograms. Whereas a similar "chambermaid" can be one and a half, or even two times heavier. The result is obvious: the smaller the weight of BMX, the easier it is to perform any tricks and jumps. Therefore, there is nothing superfluous in the construction of this bicycle.

Reinforced frame

This part is one of the most important in the design of BMX. Its characteristics meet all the requirements that are important for this type of bike: light, durable and comfortable. The shape of the frame is created by the type of two triangles with a joint base. This design is considered very solid and reliable. Large loads are smoothly distributed. Regarding the metal, you can say that the cheapest models are made from the most ordinary steel. Such material is very heavy, but relatively inexpensive. That's why it is used in low-budget models. More expensive are made of titanium, aluminum alloy or special steel, which includes chrome and molybdenum. Also in the manufacturing process, a special technique is used, which makes the frame more powerful: in places where the load is the largest, the thickness of the metal is increased. All this in combination makes the BMX construction durable and lightweight.

Controllability

The steering wheel is one of the important parts of the bicycle. As a rule, on BMX install the most usual two-element. This design is made of two bent metal pipes. Also there are four-element, but they are not so common. It can be seen that on many rudders there are crossbeams. This element is called a crossbar. It makes the design more resistant to shock loads. At the ends of the pens must be the flu. These rubber pads, which serve to better grip hands with the surface, as well as to protect the rider from injury. Since the fall is inevitable, the stubs on the flu will not allow you to scratch any part of the body about the steering wheel. This element is connected to the plug with the help of an ejection. As a rule, it is made of a single piece of metal, which increases its reliability.

Pegu

Another element that distinguishes BMX from other bicycles is the pie. What it is? These paired elements are mounted on the front and rear wheel hub. They look like ordinary oblong tubes. They are used for sliding along pipes or as an additional support. Put them or not - the owner decides.

BMX: Feedback

These bikes are not as simple as it seems at first glance. They are designed for tricks. And with this BMX are doing well. To ride long distances on them, of course, is not very comfortable, but for this there are other types of bicycles. Many owners who are engaged in tricks and jumps, are very happy with their BMX. The most important thing is to choose the right and high-quality bicycle.

A bit about prices

You can immediately note that this is not such a cheap pleasure - BMX. Prices, of course, are different. You can buy and cheap, with a steel frame and not very high-quality details. However, it will be difficult to learn something on a bad bicycle. Therefore, you should immediately choose a normal BMX. Prices for such products can start from 20 thousand rubles. But with the purchase you can not doubt the quality and reliability of the goods.

Repair BMX

As the development and operation of the bicycle, there will be some breakdowns. Especially they will appear at constant loads - performing tricks and jumping. Therefore, sometimes you have to buy spare parts for BMX. Fortunately, now it is quite easy to find any detail. Spare parts are sold in specialized stores, on the market or online store. Therefore, some simple repairs can easily be carried out at home: the simplicity of the design is very conducive to this.